Showing posts with label Makerbot. Show all posts
Showing posts with label Makerbot. Show all posts

Monday, September 22, 2014

Revolutionizing 3D Scanning: Materialise Gets Serious

3D Scanners aren't by any means new or marvelous. The technology has been available for a while now, at both a professional and consumer level. Hollywood uses it to bring various objects into movies, game designers use it to bring actors into games, and 3D designers use it to bring humans/objects into digital workflows. The concept of it has been around and many companies have experimented with it to varying degrees of success.

Professionals probably have the best of it, mocap has been used for a while now to bring actors into films and games. Most notably in movies like Avatar and games like Beyond Two Souls. However, the printing industry and likewise the entirety of the consumer industry have gotten the short end of the stick. There are 3D Scanners made available to these groups, but, generally the quality has not been as good as those used professionally. This is to be expected given the cost of professional equipment.

Some examples available to us are the
Sense,
 
Makerbot Digitizer, 
 
 and Artec 3D Scanner
 
Each of these devices has their pluses and minuses all sharing one major minus, that being quality of scans. Generally that has also been the biggest problem for non-commercial/commercial scanners.

Materliase is taking a stab a bridging that quality gap. News has recently surfaced that Materialise has begun to embrace professional 3D scanning services. With 20 years of experience already in the 3D printing industry. This giant has the tools and knowledge to crack open what would be considered more or less impossible for others.

Jurgen Laudus, Director of Additive Manufacturing Solutions at Materialise believes it'll strengthen the company's leadership position a the forefront of the 3D printing evolution. “Materialise is committed to providing its customers with high-quality, 3D Printed products,” he said. “The Scanning and Measurement Service is a result of our continued efforts to provide expertise at every step of the design process and help our customers realize the full added-value offered by 3D Printing. Combined with our expertise in software, design, and engineering, this new service helps us truly become the innovators our customers can count on to push the boundaries of 3D Printing technologies.”

The benefit to consumer 3D scanners is as larger companies like Materialise make headway in both research and technologies, smaller companies can more readily make better scanners available to the general enthusiast. Eventually reaching and influencing all fields currently tied to the 3D printing industry, spanning anywhere from fashion to games. Indie developers and startup companies will more readily have the tools to reverse engineer products and scan detailed objects into a digital field at a lower cost.

Saturday, April 5, 2014

3D Printer Pens- Something like 2.5D

While the idea of being able to draw 3D designs sounds attractive,  and while it may seem 3D extruder pens might be the missing alternative. I'm here to say that they draw more in like 2.5D, in that yes if done properly they can draw things according to the user's hands in free motion. But, achieving true free-form 3D is beyond us right now. It's also extremely painstaking to try to draw layers with your hands. The benefits of a 3D pen is more for artists trying to bring flat works into "pop-up" flat works. The structures "printed" from these pens are not structurally sound, tend to lack precision (as the extrusion is both controlled by your hand and your artistic ability), and currently their material of print is the low quality materials such as ABS, which has issues in regards to temperature of print environment. (Depending on your surrounding environment prints can curl up or droop based on the the temperature.) This was a problem the Replicator and Replicator 2's had to actively deal with and to an extent are still dealing with.


The basic principle is also similar to a high resolution hot-glue gun so don't get your hopes up of free-wire entanglements as well as having to continually feed plastic rods through the back of these pens. The size of the swissPen, 3Doodler, and 3DYaya are also not to be trifled with. The new lix pen being the only artist friendly form factor so far. I'd say if you have a machine don't give it up. These pens are not going to replace their usefulness in any way. Not unless you're a robot and can draw perfectly layer material together without any shaking from the hands. However, it is definitely an alternative to mocking-up concept ideas on paper. Being able to see Z-Axis prints can help in some aspects of the design process.


For more information on 3D Pens feel free to check out the websites of each of the makers listed above.


Some common cures for warping as provided by the makerbot blogs

Sunday, January 12, 2014

The future development of the 3D printing industry

Since 2008 3D printing technology patents expire and open. The past five years, 3D printers has gone from costly industrial equipment, to a tool accessible to hobbyists and DIY amateurs; and they’re fairly inexpensive now you only need a few hundred dollars to get cheap ABS extruder models. While owned by 3D systems, the Selective Laser Sintering, SLS technology patent will expire in February 2014, this is by far the lowest-cost 3D technology. Nowadays 3D technology is no longer an abstruse technology,  heating up inter-industry competition.
FDM (Fused Depoition Modeling) printers appeared after an explosive growth when the patent expired, so MakerBot Industries LLC became a well-known desktop 3D printer manufacturer, Stratasys Ltd. purchased the rights to MaketBot technology, spending a whopping $ 403 million in the acquisition process. Before, the expiration of the patent 3D printers cost upwards of $ 14,000, acquiring a basic 3D printer now will run you just a few hundred. Unfortunately, Cheap 3D desktop printer still can’t print out mass production molds, so they cannot replace traditional manufacturing.
But, when the laser sintering technology patent expires, expected changes may occur, due to the very high resolution of this technique, printed products can be sold directly. Will be more used in various industries.
Now even the big traditional printer companies like Hewlett Packard, also see the potential of 3D printing. At the Canalys Channels Forum meeting held in 2013, in Bangkok, HP announced it is working on a 3D printer, and is expected to be ready in middle of 2014; will this be a new breakthrough in the quality of 3D printing? At present, we can see on the Internet that many companies are frantically developing 3D printer technology, jumping on the already crowded bandwagon. You’ll soon see the 3D industry entering the consolidation phase. Let us wait and see the growth of the 3D printing industry in 2014.